Davey's Horizontal Multistage Water Pump With Torrium2 Controller - HM60-6T
Key features:
- Standard automatic pressure system type.
- Max. flow: 80 Litre per minute (lpm)
- This version is suitable for the smaller household (for single storey house).
- For household, garden, farming, and agricultural use.
- 24 months warranty for pump, motor & controller.
(24 + 6 additional months with e-Warranty scheme) - Fixed pressure setting on every usage.
- Easy installation, no setting required.
Classified As:
Overview of Davey's Horizontal Multistage Water Pump With Torrium2 Controller - HM60-06T
The HM60-06T is a horizontal multistage pressure system designed for domestic water supply, irrigation, and general water transfer applications. It is equipped with a Torrium2 controller, providing automatic operation and consistent water pressure for household use.
The pump features an all-stainless steel hydraulic design, ensuring corrosion resistance, durability, and efficient performance. Its multistage impeller system allows it to deliver stable pressure with reduced noise and energy consumption, making it suitable for continuous operation.
In terms of performance, the HM60-06T delivers a nominal flow rate of 60 L/min with a maximum pump pressure of 460 kPa and operates with a 0.85 kW motor (0.58 kW output). It supports water temperatures up to 65°C, making it reliable for typical domestic and light-duty applications.
Horizontal Multistage Water Pump Variations
| Pump Model | Product Code (SKU) |
|---|---|
| HM60 | HM60-06, HM60-06T, HM60-08, HM60-08T, HM60-10, HM60-10T |
| HM80 | HM80 only |
| HM90 | HM90-08, HM90-08T, HM90-11, HM90-11T, HM90-13, HM90-13T |
| HM150 | HM150 only |
| HM160 | HM160-15, HM160-15T, HM160-19, HM160-19T |
| HM270 | HM270-19, HM270-19P, HM270-25, HM270-25P |
| Three Phase Models Only | |
| HM150-X-3 | HM150-15-3, HM150-22-3, HM160-15-3 |
| HM160-X-3 | HM160-15-3, HM160-19-3 |
| HM270-X-3 | HM270-19-3, HM270-25-3 |
| HM300-X-3 | HM300-30-3 |
Various versions of the Horizontal Multistage electropump have been presented, each designed to suit different needs and conditions. Similarly, the diverse specifications available lead to varying performance outcomes based on the selection of the water pump. The Horizontal Multistage pump can feature 3 to 6 impellers, known as 3, 4, 5, or 6 stages respectively. As the number of stages increases, the flow rate measured in liters per minute (L/min) also rises, while all information regarding the HM h2o pump models is documented in detail with precise technical charts for public reference.
For the HM60 series, this Horizontal Multistage pump series has up to four stages that is single in phase.
HM60-06T Horizontal Multistage Pump's Method of Identification
The categorization of all product codes at Davey Water Products is centralised, ensuring uniformity across the globe. The identification of the electropump starts with:
1) A sequence featuring a shortened name.
2) Carried on by the measurement of the flow rate.
3) The power output in kilowatts.
4) Finally, the phase of voltage located on its back.
As an example, for the Horizontal Multistage water pump, the encoding in the image is HM60-06T. This begins with a short designation, or ‘HM’ in this instance, followed by 60, which represents the nominal flow rate in Litre per minute, generating 1.5 kilowatts of power and requiring a 3-phase voltage connection.
Internally, this entity code primarily serves as a tracking identifier within Davey’s warehouse to accurately locate the appropriate water pump for order purposes, ensuring that the inventories are organized consistently for professional sorting within our extensive industrial shelving range.
Attachment
Pressure Controller
When installed on Davey’s HM60-06 centrifugal pump, the Torrium 2 might be an essential integrating component. It is an electrotechnology that is intended to function as a smart controller to control uniform water flow and provide stable pressure in homes and commercial buildings. The only way to do this is to start the pump on a pressure decrease and stop it when the flow rate is low, about 1 liter per minute (LPM).
Reducing the subsequent strain of turning on and off the horizontal multiple-stage electropump is one benefit of purchasing the Torrium2. Water hammer, which could otherwise cause impending damage, is prevented by this soft start-stop, which is only completed by its natural mechanism by very gradually rising and lowering the pace.
Strong Starting Pressure: The sensor that senses an intense water demand and only steps in when the pressure falls to 80% of the maximum output is a key component. This peak serves a versatile function that is determined by the performance of any pump since it is automatically set if the booster pump stops.
Start Adaptability: Water pump cycling is frequently caused by leaks, but the Torrium2 is intelligent enough to distinguish between users who need water and those who are leaking needlessly (such as droplets from the tap). This intelligent controller would adjust to 50% of its last used pressure in situations where an exceptionally low flow rate occurs in order to further prevent further revolution. In the meantime, the Torrium2 would switch back to its adaptive beginning mode in order to activate the Horizontal Multistage pump if the hydration ran above 0.5 LPM.
Dry-Running Protection: Water pumps are always designed to have a full volume of liquid flowing through them. Because of this, whenever the Torrium2 detects a prime loss in Davey’s horizontal multistage centrifugal pump, a fail-safe mechanism is activated to fully stop the pump from operating. The Torrium2 will also retry itself after intervals of 5 and 30 minutes, or even 1, 2, 4, 8, 16, and 32 hours, while the timedown is being reduced. However, it would also restart itself to enable the Horizontal Multistage pump to operate once the proper water pressure entered.
The Torrium 2 and other representative models of Davey’s Horizontal Multistage water pump include an extra alphabetical letter “T” in the back end of their formal product code, right behind the Kilowatt/power2 sequencing number. One example of a quintessence is the HM160-14T substitute.
Mechanical Pressure Switch
A mechanical pressure switch, which is installed as an oversight to activate functionality dependent on the desired pressure level, may be attached to Davey’s HM60-06 Horizontal Multistage pump.
Trigger/Closure: This helps to turn on or off whenever watering levels climb or fall above the optimal pressure.
Adjustable: End users can adjust the cut-in and out points to suit the requirements of a water system, emphasizing a balanced damping application rather than putting undue strain on Davey’s HM60-06T Horizontal Multistage water pump. This further prevents needless pressure drops or surges that could harm pipes.
Resource and energy conservation: By using the Horizontal Multistage water pump with the pressure switch variation, natural resources like our raw water source, which is provided by Air Selangor or a comparable ration-sourcing body, can be preserved as much as feasible. This only occurs because the strength of the water flow rate is only desirable when specifically required, which eventually lessens the electropump’s wear and tear and prolongs its lifespan.
The systematic alphabet letter “P,” which is positioned at the back, acknowledges the SKU version of Davey’s horizontal multistage that incorporates this pressure switch. The HM270-19P electropump is one example.
Pressure Tank
Another optional accessory for Davey’s horizontal multistage water pump is the pressure tank. This component plays an important role in supporting consistent operation, especially for booster pump systems, by storing water and reducing the frequency of pump start-stop cycles.
The pressure tank is fitted with a diaphragm—a flexible membrane that separates water and air within the tank. This separation is crucial, as mixing the two can lead to cavitation, a condition that may cause significant damage to the pump system and surrounding components.
HM60-06T Water Pump's Certification
Davey has gathered the required accreditations required for a market-entry setup in order to continue expand into various territorial regimes and continents, such as Malaysia in Southeast Asia. As a result, the Horizontal Multistage centrifugal pump underwent testing and received top-notch certifications. These certifications are limited to the usage of home appliances, the assessment of the water pump’s suitability for rationing, and/or the observation and rigorous testing of the pump within the manufacturing production line to ascertain its consistent quality.
SGS Approved: Davey’s HM water pump bears a safe range of electricity safety standards within domestic application thanks to the inspection conducted by Société Générale de Surveillance. Testing for inadvertent shock, possible centrifugal pump shorting, potential fire generation, and even confirming if the horizontal multi-stage is appropriately enclosed and contained are instances of retorts to the definition of electrical protection.
European Standards: Davey complies with the official regulatory body’s technical mandate for the Horizontal Multistage pump in order to guarantee security, superior grading, interoperability, a more environmentally conscious approach, and trade access to Western territory. Another way that this water pump helps to improve society is through technological improvement.
International Electrotechnical Commission (IEC): In order to achieve mutual recognition agreements (MRAs) for broader trade access, Davey has adhered to the global authority on voltage and electronic-based technology, which was founded in 1906 and publishes and upholds benchmarks for all of its mechanical engineering goods.
Australian Standards: The main benefit of gaining Davey’s home ground’s trust is that a self-governing, non-profit regulation has finalized the approval of the Horizontal Multistage pump and its diesel motor version for electric-powered safety.
- AS4020:2005: The Australian Standard’s benchmark states that all materials used in the construction of water systems, including the Horizontal Multistage pump, must remain safe when they come into contact with drinking water. This certified byproduct is important for manufacturers and suppliers like Davey to establish a guarantee that liquids run by their water pumps are intrinsically safe to consume. This electropump is tested using a variety of points of reference and testing techniques on the pipes, attachments, coating, and any related materials.
New Zealander’s Standards: Davey’s qualifications for spreading logic have won it another consumer safety verification for the Oceania area.
ISO 9001: A quality control system that distinguishes between the higher tier alignment and the typical pump manufacturer. As officials examined our routine in the ongoing pursuit of improvement, Davey’s Horizontal Multistage electropump was able to secure this. They also discovered that our products were consistent from batch to batch across the supply chain distribution.
ISO 14001: The horizontal multistage pumps were made using a green consciousness protocol for a better planet and a more sustainable future. The ISO 14001 stands for the introduction of recycling practices throughout Davey’s assembly, the shutting off of superfluous lights during specific periods of inactivity, the replacement of outdated bulbs with light-emitting diodes during the pump formation, and the appropriate route dividing for a quicker and farther-closing delivery of Davey Malaysia’s products.
Overall, obtaining these accreditations has increased Davey’s credibility and reputation while also increasing customer satisfaction with the Horizontal Multistage electropump’s frequent use.
TEFC Motor
For every period of daily use, Davey’s Horizontal Multistage pump runs at full strength and a consistent water pressure pace. Regardless of the current utility period, this is as simple as any centrifugal pump gets.
Easy Setup: This horizontal multistage electropump’s simplicity lies in the fact that it can be easily installed by placing it directly beneath the water tank, connecting it in, and then allowing it to run. People who desire a direct water pump arrangement in their homes or businesses don’t need to take any further procedures.
More than 200 starts per hour: A stable and robust number of starts the engine can achieve without experiencing mechanical failure is one of the key features that lures Davey’s Horizontal Multistage pump to its fable. This hourly cycle significantly outperforms many of our rivals in the centrifugal pump market. However, only some Hotizontal Multistage pump versions are capable of more than 200 starts per hour.
Reliable and Proven: The fact that all horizontal multistage pumps have been on the market for a considerable amount of time indicates that the mechanical engineering concepts required to create this device are dependable and unquestionably proven. Therefore, if this centrifugal pump needs to be fixed at all, there is an abundance of readily available research and development, a supportive culture, and a large variety of conveniently accessible spare parts.
Cost-Savvy: With sufficient components and an electrical motor pump with a single direct-to-access force of gush needed for a good shower, irrigation, or cleaning, the already advanced engine electrotechnology requires no additional tuning, and Davey Malaysia has a strong supply chain that makes it simple to assemble the Horizontal Multistage water pump in bulk, resulting in a cost-effective product that is currently widely used worldwide.
HM60-06T Pump For The Right Household
A visual representation, organised around the key factors of a landed property, has been developed by Davey Malaysia’s mechanical engineers to identify the most suitable water pump system for the residence, as illustrated below:
The HM80 and HM150 are among Davey’s range of horizontal multistage water pumps designed for residential use.
As illustrated, Davey’s engineers have carefully evaluated all relevant water system variables, including typical piping configurations, to determine the most suitable pump for different types of homes. For single- to double-storey houses, the HM80 is sufficient to meet daily water demands, while three-storey properties generally require the HM150 electropump for optimal performance. In essence, larger residences demand higher-capacity horizontal multistage pumps to ensure consistent water supply.
For the HM60-06T, this electropump is specially designed for small-storey houses.
HM60-06T's Suction Inlet Sizing
Any water pump’s suction inlet’s primary function is to let the right kind of fluid enter and be transferred into the system for further pressurization. Depending on the centrifugal pump being used, this situation changes.
For instance, a sump pump’s input contains a grinder and a filter-strainer to remove trapped debris, allowing sewage to be fed into the water system’s engine. This helps reduce flooding and/or waste management for ethical and hygienic reasons. As a home pressure system, Davey’s Horizontal Multistage pump’s primary function is to draw in a clean water source exclusively.
Unidirectional Flow: The horizontal multistage water pump, which has a dynamic structure to maintain flow rate, aids in directing the aquatic fluids unidirectionally into the impeller section while the electrical motor pulls in water through a pressure differential.
This electropump comes in a variety of models with varying intake sizes. This is to make sure that the pump’s output is equal to the housing’s piping system because water overflows easily. However, a connector can be utilized to bridge and remedy the dimensional gap differences if the pipe’s diameter is discovered to be significantly less (or larger) than the Horizontal Multistage pump’s input itself.
| 240V Single Phase Model | ||
| Product Code | Ports | |
| Suction BSP | Discharge BSP | |
| HM60-60 | 1.25 inch (31.75mm) | 1 inch (25.4mm) |
This phenomenon manifests itself on its own as a necessary net positive suction head (NPSH) when any of Davey’s Horizontal Multistage water pumps reach full water suction and there are no air pockets in the water system.
Reduced Friction: This centrifugal pump’s larger intake sizes result in a higher flow rate since the water flows through it much more freely. This is yet another instance in which self-priming accelerates significantly.
Volute (Pump Casing)
The volute, which seems to be cylindrical while maintaining the integrity of several staging bodies (diffuser and impellers), is actually spiral in shape on the inside and is constructed using a durable and polished composite metal combination. There are four reasons to apply this for the horizontal multistage water pump:
As water swirls and passes through each stage of the impeller before continuously exiting through the outlet, it helps the discharge fluids’ excessive strength. The electropump’s thoughtfully designed volute reduces turbulence and maximizes flow rate overall.
Protective barrier: The durability of the otherworldly volute casing keeps out any exterior residue or even litter that would interfere with the Horizontal Multistage pump’s clean water supply or otherwise harm the current setup.
Interchanging Energy States: The water is gradually forced away from the center and centrifugally resisted to the outer alloy walls before being released onto the Horizontal Multistage pump’s outlet. This process starts with the motor developing a suction force and moves towards the interior area where fixed impellers impart its kinetic energy. As the volute chamber fills throughout this process, this change in energy transforms from kinetic to pressure, decreasing speed while simultaneously increasing water pressure. This phenomenon is consistent with the scientific law and observation of Bernoulli’s principle.
Self-Priming Affirmation: The Horizon Multistage water pump will eventually be devoid of any air gap that permits self-priming as the volute body gets internally moistened and hydrated. If not, destructive cavitation could be caused by trapped air surging into the impeller as it spins alongside water.
Impeller And Diffuser
Impellers and diffusers are compartmentalized within the volute chambers, arranged in a systematic manner as staging bodies. These staging bodies, sometimes referred to as the protective bracket, play a crucial function in keeping these devices in place and preventing them from coming free inside the Horizontal Multistage water pump when operation and revolutions start.
Each staging body chamber would create an increase in pressure required for the best flowing faucet use, showering, or applying across other daily necessities as water travels from the first phase to the next.
Closed Impeller Fitting
In order to reduce the thrust load, closed impellers are fitted on the shaft to optimize fluid handling while the rotor is being driven.
Improved Performance: Because its vane is double-walled (front and rear), the liquids inside are directed suitably to a smooth and dependable output as they exit in centrifugal force to the outlet, resulting in an electropump with exceptional hydraulic performance.
Cavitation-Apparatus Prevention: The impellor’s protective barriers make the Horizontal Multistage water pump much less vulnerable to the formation and collapse of air bubbles inside the water, thereby preventing additional damage to the pump.
Longer Service Life: When thrust load is reduced, bearing life, usage frequency, and shafting expenses are all reduced, making the horizontal multistage centrifugal pump more durable.
Because the impeller and diffuser are constantly dampened with large volumes of fluid, stainless steel material is employed to avoid deterioration while retaining strong endurance during the cycles of the horizontal multistage water pump’s operation.
Smooth Surface: This component is polished as smoothly as possible before the impeller is inserted into the electropump in order to minimize surface tension, which results in the least amount of friction and turbulence. In Davey’s Horizontal Multistage pump, this technique results in increased fluid movement efficiency while reducing needless energy loss through power consumption (measured in kilowatts).
Thermodynamics Stability: In situations where the temperature of the gush supply varies, the impeller made of higher-grade stainless-steel material performs steadily, with its mechanical characteristics barely contracting or expanding. This makes it possible to suck hot and cold clean water into the horizontal multistage pump in a variety of ways.
Backplate And Mechanical Seal
In order to reduce the thrust load, closed impellers are fitted on the shaft to optimize fluid handling while the rotor is being driven.
Improved Performance: Because its vane is double-walled (front and rear), the liquids inside are directed suitably to a smooth and dependable output as they exit in centrifugal force to the outlet, resulting in an electropump with exceptional hydraulic performance.
Cavitation-Apparatus Prevention: The impellor’s protective barriers make the Horizontal Multistage water pump much less vulnerable to the formation and collapse of air bubbles inside the water, thereby preventing additional damage to the pump.
The most important factor in determining whether Davey’s Horizontal Multistage pump would continue to function is the part when electrical engineering deviates from its mechanical field application. A backplate and a mechanical seal component are integrated into the engine to prevent any possible splash from entering the core motor, since the engine’s electrotechnology components must stay away from water contact to prevent short circuiting. This is done by sealing the remaining gaps with a gasket or washer.
In the same instance, water that spiraled outward would be distributed toward the discharge outlet, using the centrifugal pump to achieve the desired water supply. In order to prevent Davey’s Horizontal Multistage pump from tilting or going out of alignment once rotation starts, the backplate and mechanical seal are also installed to maintain the shaft in a stationary position.
To guarantee that the mechanical seal of the Horizontal Multistage water pump is continuously enclosed, a circlip can be found inside the mechanical seal and before the backplate, where spinning stress is passed onto it. However, this circlip—also referred to as a clip spring in the official Davey Water Products handbook—is entirely absent for the HM80 and HM150 series alone.
O-Ring Tightened, With Vibration-Absorbent Spacers
In order to guarantee a tight fit and stop further latent leakage from emerging, the Horizontal Multistage electropump is coupled with an O-ring whenever feasible when each core piece joins from one segment to another inside. This hydrocarbon, which is molded using EPDM (ethylene propylene diene monomer) rubber, outperforms neoprene in terms of increased warmth and is ideal because it works well with Davey’s Horizontal Multistage water pump for temperature stability. Usually, the volute case has a large number of these O-rings.
In order to prevent the revolving pieces in this horizontal multistage water pump from grinding against one another, spacers are inserted. Additionally, when the HM electropump starts operating, its placement helps the mechanical bearings stay precisely in place while preventing any particular parts from being excessively compressed.
Absorbing Vibrations: These spacers in the horizontal multistage centrifugal pump function as pseudo-vibration absorbents to reduce any needless machine stress and temper further rigidity.
Similarly, every internal component of this water pump, including the impellers, mechanical seal, spacers, circlip, and even its volute casing, is built of sturdy stainless steel 304 (or SUS304) to ensure uniform hardness. Only the motor-connected shaft, which is constructed with the durable SUS316, is intended to convey rotating power severely.
Number of Stages
| Models | HM60-06 |
Stages | 4 |
Horizontal Multistage Pump With Torrium2's Operating Limits
| Operating Limits | |
| Maximum continuous flow rate | 200L / min (53 US gallons) |
| Maximum operating pressure | 700 kPa* (102 psi) |
| Maximum current | 10 amp |
| Cut-in pressure range | 80% of pump shut-off head |
| Maximum water temperature | 65°C (149°F) |
Suitable fluid: Clean, clear, non-corrosive, non-flammable liquids with no fibres and little sand/sillica or abrasives (maximum concentration 40g/m3
).
*Depending on the selected pressure tank rating, operating pressure of up to 820 kPa can be achieved.
*“L” denotes litres.
*kPa (kilopascal) is a unit of pressure.
*PSI refers to pounds per square inch.
*Amp is short for ampere (A), the unit of electric current.
*Temperature is measured in degrees Celsius (°C), while degrees Fahrenheit (°F) is the unit commonly used in the United States.
Horizontal Multistage Pump With Torrium2's Hydraulic Performance
| Hydraulic Performance | ||||||||||
| Models Single Phase | Motor | Amps | Port (BSP) | Nominal Operating Pressure kPa | Maximum Pump Pressure (kPa) | Tank Air Pre-Charge (kPa) | Nominal Flow (lpm) | |||
| P1 kW | P2 kW | Run | Start | Suction | Discharge | |||||
| HM60-06T | 0.85 | 0.58 | 4 | 18 | 1 1/4″ F | 1″ M | 280 | 460 | 320 | 60 |
| HM60=08T | 1 | 0.72 | 4.5 | 18 | 1 1/14″ F | 1″ M | 360 | 575 | 400 | 60 |
| HM60-10T | 1.25 | 0.94 | 5.9 | 28 | 1 1/4″ F | 1″ M | 430 | 690 | 480 | 60 |
| HM90-08T | 1.1 | 0.78 | 4.9 | 20 | 1 1/4″ F | 1″ M | 310 | 460 | 320 | 90 |
| HM90-11T | 1.4 | 1.05 | 6.5 | 28 | 1 1/4″ F | 1″ M | 420 | 585 | 410 | 90 |
| HM90-13T | 1.7 | 1.4 | 7.2 | 40 | 1 1/4″ F | 1″ M | 480 | 680 | 475 | 90 |
| HM160-15T | 1.9 | 1.5 | 8 | 40 | 1 1/2″ F | 1″ M | 340 | 460 | 320 | 160 |
| HM160-19T | 2.3 | 1.8 | 9.7 | 40 | 1 1/2″ F | 1″ M | 400 | 600 | 420 | 160 |
Horizontal Multistage Pump With Torrium2's Dimensions (mm)
| Dimensions (mm) | ||||||||||
| Models | A | B | C | D | E | F | G | H | I | Net Weight (Kg) |
| HM60-06T | 411 | 100 | 127 | 410 | 171 | 316 | 98 | 115 | 215 | 12.7 |
| HM60-08T | 459 | 100 | 175 | 410 | 171 | 316 | 98 | 115 | 215 | 13.6 |
| HM60-10T | 459 | 100 | 175 | 410 | 171 | 316 | 98 | 115 | 215 | 18.4 |
| HM90-08T | 411 | 100 | 127 | 410 | 171 | 316 | 98 | 115 | 215 | 13.1 |
| HM90-11T | 459 | 100 | 175 | 410 | 171 | 316 | 98 | 115 | 215 | 17.8 |
| HM90-13T | 503 | 124 | 175 | 435 | 206 | 340 | 98 | 115 | 215 | 23.6 |
| HM160-15T | 510 | 124 | 178 | 435 | 206 | 340 | 98 | 115 | 215 | 23.2 |
| HM160-19T | 540 | 124 | 178 | 435 | 206 | 340 | 98 | 115 | 215 | 23.5 |
Horizontal Multistage Pump With Torrium2's Hydraulic Loss
Packaged Sets
Complete packaged systems are available on request. Pressure tank and pump mounted on common base plate. Optional control panels also available for single and three phase models.
Electrical Data
| Electrical Data | |
| Speed | 2,900 rpm |
| Supply voltage | |
| Single phase | 230V +-10% |
| Three phase | 415V +-10% |
| Supply frequency | 50 Hz |
| Enclosure class | |
| HM60-06, HM60-08, HM60-10, HM90-08 & HM90-11 | IP 55 |
| All other models | IP 56 |
| Insulation class | Class F |
| Torrium2 | |
| Voltage | 220 – 240V +-10% |
| Phase | Single |
| Hz | 50 / 60 Hz |
| IP rating | 56 |
| Maximum load current | 10A |
| Maximum motor size @ 240V input | 1.8 kW |
| Surge protection | Varistor |
Materials of Construction
| Materials of Construction | |
| Part | Material |
| Casing | 302 stainless steel |
| Impellers | 304 stainless steel |
| Stages (casing) | 304 stainless steel |
| Pump shaft | 316L stainles steel |
| Stage centring device | 304 stainless steel |
| Mechanical seal | |
| Rotating | Carbon |
| Stationary | Ceramic |
| Spring | 316SS |
| Bellows | EPDM |
| O-rings | EPDM |
| Plugs | 316L stainless steel |
| Motor shell and lantern bracket | Aluminium with baked polyester powder coat finish |
| Motor feet | Xenoy |
| Fan cowl / rear foot (models up to 1.05kW) | Polypropylene |
HM60-06T, HM60-08T, HM60-10T, HM90-08T, HM90-11T & HM90-13T's Hydraulic Performance
Included In The Box
Horizontal Multistage Water Pump
User Manual
Proof of Purchase
24 Months of Manufacturer Warranty (Increased by Another 6 Months with e-Warranty Scheme)
Contact Us